加入收藏設為首頁聯系我們

        歡迎光臨廣州市通駿機械設備有限公司官方網站!

        信譽第一,質量至上注重工作細節,提高服務品質

        全國24小時服務熱線 :
        400-7728-317

        當前位置:首頁 > 產品展示 > 氣動點(凸)焊 > TMF系列中頻逆變直流點(凸)焊機

        ?

        產品詳細

        中頻逆變直流點焊機
        發布者: 發布日期:2018-10-20 16:43:47
        TMF系列中頻逆變直流(凸)焊機
        TMF Series Medium Frequency Inverter DC Spot welding Machine
        特點及用途
        1、通電時間短、熱效率高、可有效抑制焊接飛濺、獲得穩定高品質的焊接效果,焊接成型美觀。
        2、控制精度高,中頻點焊機由于工作頻率高(通常在1-4KHz),使得反饋控制精度是一般交流點凸 焊機和次級整流點凸焊機的20-80倍,相應的輸出控制精度也非常高。
        3、逆變點焊機采用三相輸入,宜于電網供電平衡,無須電力補償設備,對電網無干擾。
        4、由于熱效率高、焊接變壓器小、鐵損小,焊接同樣的工件比交流點焊機和次級整流點焊機節能可達30%以上。
        5、特別適合于導電率較高的銅、鋁和鍍鋅金屬等材料,焊接效果良好,尤其適合于三層板焊接、非常薄的材料的焊接以及精密焊接的要求。
        Main Features:
        1.Current time is short, high thermal efficiency, which can effectively inhibit welding spatter, stability of high quality welding effect, beautiful welding forming
        2.Control precision is high, intermediate frequency spot welding machine due to the high working frequency (usually in 1-4 KHZ), the feedback control precision is general ac point convex welder and secondary rectifier point convex welder 20-80 times, the corresponding output is also very high control precision.
        3.Inverter spot welding machine adopts three-phase input, like the balance of power supply, no power compensation equipment, no interference of power grids
        4.Energy saving: due to the high thermal efficiency, small welding transformer, welding inverter and small iron loss, welding the same artifacts, than ac spot welding machine and secondary rectifying spot welding machine and energy saving can reach more than 30%
        5.Wide applicability: can welding materials such as copper, aluminum, and galvanized metal, welding effect is good.Three layer board is especially suitable for welding, welding material is very thin, and the requirements of precision welding
         
        主要技術參數 Main Technical Parameter
         
        參數/型號
        Parameter/model
        TMF-50KVA TMF-90KVA TMF-150KVA TMF-170KVA TMF-250KVA TMF-300KVA
        額定電源
        Rated/Voltage
        3相,交流電(AC),380------415-----480V,50/60HZ
        額定容量
        Rated/Capacity
        50KVA 90KVA 150KVA 170KVA 250KVA 300KVA
        額定占截率
        Rated Duty Cycle
        50% 50% 50% 50% 50% 50%
        最大焊接電流
        Max Welding Current
        18500A 23500A 32000A 40500A 56500A 80000A
        電極行程
        Electrode Stroket
        75MM 100MM
        電極臂間距
        Welding Arm Spacing
        260MM 320MM
        氣源壓力
        Air Source Pressure
        0.6MPa
        冷卻水流量
        Cooling Water Flow
        16L/Minute 25L/Minute 35L/Minute 45L/Minute

        想要了解更多關于自動閃光對焊機的信息,請點擊:http://www.berkwasserman.com
        上一篇:中頻逆變直流點焊機
        下一篇:返回列表
        彩乐彩票